VTA Billet Breather Tank UPR (fits 24-26 Mustang GT ProCharger, ESS) – Breather Tank-Satin Silver

UPR Plug N Play Breather Tank Kit for 2024-2026 5.0L Mustang GT with ProCharger Supercharger System or ESS Tuning Supercharger System. This exclusive kit easily mounts to the passenger side of the engine compartment with the new UPR quick release Clock able Bracket design allows the Breather Tank to be mounted in many positions to accommodate your needs.

Designed to provide the best oil control without any questions. 100% CNC machined Oil Separator System provides the most sure fire way to eliminate any chances of oil getting into your inter-cooler and intake tract since there is no connection to intake vacuum or air inlet tubes. Ideal for race cars running a ProCharger supercharger system. This is the only complete ready to go no modifications needed Plug N Play Breather Tank System for your Procharged S650 Mustang!

From the exact fit UPR Braided lines, Exclusive UPR Plug N Play fittings and UPR Quick Release Billet mounting bracket system. Giving you everything needed to protect your engine from any unwanted Blow-by. UPR Breather tanks are easy to drain with either the provided petcock or you can unscrew the containment cup to drain, inspect and clean the contents out. You can’t do that with those over priced welded up breather tanks!

Vent to Atmosphere breather tanks are for Racing / Off Road use only and do not comply with any emissions regulations. Additional tuning may be required. If you install this kit on a street driven vehicle you assume all liabilities for any emissions inspection fines or inspection denial. If you are sensitive to odors, this may not be for you since crankcase fumes will be vented from the filter on the breather tank. This UPR Pro Series catch can kit is shipped ready to install even if no upgrades are selected. Upgrades are available to allow you to tailor the kit to fit your needs.

Optional Parts:

UPR Adjustable Billet PCV Fitting:
The adjustable Billet PCV fitting includes 4 different size jets. It eliminates the failure prone factory PCV and still allows for the needed restriction. Jet sizes and application basics for Adjustable version are explained below.

.100 Jet size is slightly more restrictive than the factory PCV fitting to allow you to restrict the PCV for vehicles ingesting too much oil through the PCV and wanting to reduce oil consumption.

.125 Jet size is slightly less restrictive than the factory PCV fitting to allow you to adjust the pcv to increase flow a bit more than factory for vehicles that only need minor adjustments to eliminate vapor locking in the PCV system.

.150 Jet size is even less restrictive for the boosted vehicles that tow and are driven harder to increase flow more than factory for vehicles that only need more adjustment to eliminate vapor locking in the PCV system.

.175 Jet size is the least restrictive compared to the factory PCV fitting and allows for the largest adjustment of the jets for modified vehicles that generate a lot of blow-by / back pressure to eliminate vapor locking / flooding the clean side of the PCV system with oil.

Replacement Breather Filter:
Spare filter is a good thing to keep on hand. If original filter gets dirty and needs to be clean it can be swapped out and then cleaned at your convenience.

Replacement O-Rings:
Spare O-rings for the breather cup. If the O-ring is lost, torn or if it’s just time to replace it due to wear it’s a good idea to have a couple of spares in the glove box.

Drain Line Kit:
The drain line kit includes a drain valve, hose and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access like the wheel well opening or bumper area. If you select this option you can not also use the Magnetic Drain Plug.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

Product Features:

Show Quality Finish
Easy 20 minute install
Can measures 6.00″ x 3.00″
For Off Road / Racing use only High Quality CNC Machined Billet Aluminum
Vents oil vapor/crankcase pressure to atmosphere
5/8″ Oil Resistant Continental Braided Hose included
Improves Fuel Economy, Throttle Response & Performance Designed to be a complete Plug N Play System for the Mustang GT
Available in Satin Silver or Black – Select Above

Fits These Vehicles:

2024 2025 2026 Mustang GT with ProCharger Supercharger Kit. Does not fit Whipple, Roush or Stock applications with a stock style air boxes in place. For a breather tank for a Whipple or Roush Supercharged S650 click here. For a breather tank for a naturally aspirated S650 click here.

Made in the USA!