Plug N Play Single Valve Oil Catch Can with CSS (fits 2023-2026 Ford F250 7.3 Godzilla/6.8 Gas) UPR – Catch Can with CSS fits 23-26 Superduty 7.3/6.8 Dual Battery-Black

This Ford F250 Superduty gas 7.3L/6.8L single valve Plug N Play catch can kit with clean side separator is the perfect fit for your engine bay. Our CSS with the braided line will keep oil from splashing back into the intake tube at higher RPM. If you are thinking of installing a Procharger supercharger system, No Problem, this catch can kit will be a perfect addition!

Utilizing Continental Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup Possible. No cheap stock lines here that have been cut and spliced on! Featuring the New UPR Plug N Play Catch Can Fittings. So you can empty the it without removing the intake cover or catch can lines from your engine. (UPR Exclusive Push Button Fittings)

Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.

UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.
UPR Clean Side Separator (CSS):
This Clean Side Catch Separator is especially beneficial to modified vehicles with added Superchargers or Turbo kits. As crankcase pressure builds up under BOOST, it will be forced out of the driver side valve cover fitting. This clean side separator will still allow clean air to enter the crankcase as the factory intended, but will catch oil and impurities when crankcase pressure is high, preventing that gunk from getting into your cold air kit and throttle body. Once normal driving resumes, the Clean Side Separator will allow the oil mist to return to the crankcase.

Installs in 15-20 minutes. This UPR Pro Series catch can kit is shipped ready to install even if no upgrades are selected. Upgrades are available to allow you to tailor the kit to fit your needs.

Optional Parts:

UPR Billet One-Way Valve Cover Breather:
These are Valve Cover Breathers with a one-way valve inside of it. These are designed to allow excess/positive crankcase pressure to exit through the breather when in boost. Then it closes to return to vacuum while driving to prevent un-metered air from entering to maintain perfect drivability. These are also ideal for vehicles in very cold or freezing weather as it allows crankcase pressure to escape until condensation or frozen condensation in the PCV hoses melts or thaws. This is a must to ensure maximum engine seal life.

UPR Billet Pro Series Check Valves:
These are larger higher flowing check valves than the standard check valve. It will increase the vacuum through the catch can and deliver better crankcase evacuation. The improved crankcase evacuation translates to increased MPG and more responsive low speed drivability. The arrow printed on the check valve will always need to face away from the catch can. There is no down side to having a check valve in a Naturally Aspirated (NA) application, and a check valve in required in boosted applications. The larger, higher flowing Pro Series Check Valve also has a hex nut on the body so you can disassemble it for inspection and cleaning.

Replacement O-Rings:
Spare O-rings for the catch can cup. If the O-ring is lost, torn or if it’s just time to replace it due to wear it’s a good idea to have a couple of spares in the glove box. 5030 is the main dirty side catch can and 5043 is the clean side catch can.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

Product Features:

16oz Capacity
Show Quality Black Anodized Finish
Can measures 3″ x 6″
Prevents Oil from Entering Intake
Exclusive 4 Stage Design Traps Oil
Innovative Diffuser Tube and Chamber
High Quality CNC Machined Billet Aluminum Plug N Play fittings at Catch Can connections
5/8″ Oil Resistant Continental Braided Hose included
Innovative Adjustable Mounting Bracket (360 Rotation)
Improves Fuel Economy, Throttle Response & Performance

Includes:

OEM 5/8″ Factory Connectors
5/8″ Continental Braided Hoses Billet Hose Ends with Clamps
Billet Adjustable Mounting Bracket
Plug N Play quick release connectors & billet fittings
Single Valve Billet Catch Can (Exclusive 4 Stage Design)
Clean Side Separator (Multi Stage Filtration)

Fits These Vehicles:

2023 2024 2025 2026 Ford Superduty F250 F350 7.3 Godzilla 6.8 GAS Truck F Series Tremor. Does NOT fit diesel Superduty trucks.

Made in the USA!